北京美國LECO分析儀優惠價格

美國LECO力可氧氮氫分析儀ONH836（氧氮氫聯測儀）系列硬件部分

特點和優勢

1、爐頭區域LED照明系統

2、爐頭快速拆裝的粉塵過濾裝置

3、裝有自動旁路閥的可快速拆裝氧水捕集裝置

4、**的動態流量補償（DFC）保證熱導池氣體流量、壓力恒定

5、改進的紅外檢測池技術

     新紅外池的恒溫絕熱技術消除了外界環境溫度的干擾

   長壽命的紅外發射光源和無漂移的電路設計保證紅外檢測池的長期穩定

   氧高低雙量程采用3個碳紅外檢測器，同時檢測一氧化碳和二氧化碳，保證準確定量

  6、高效脈沖爐冷卻系統

   強力內循環水冷裝置

   雙直流風扇保證持續冷卻，不受電壓波動的影響

   新電極爐頭設計，提高脈沖爐熱交換效率

  7、全自動分析系統（可選）

   自動清掃裝置

   20位或100位全自動分析系統

   高速全自動真空除塵裝置直接將粉塵排至儀器外部捕集器中，消除環境污染

穩固的爐頭試樣加載結構。北京美國LECO分析儀優惠價格

Instrument Highlights and Features

Features and Benefits

LED light ring illuminates the furnace area

Choice of either argon or helium carrier gas

Novel electrode design increases heat transfer efficiency for increased stability

Non-touch interface systems are also available

User-friendly brand software

High-Performance Detector Design

Thermostatic construction provides increased protection from ambient temperature fluctuations

Optimized emitter control and detection circuitryimproves the IR cell lifetime and long-term stability,

resulting in superior accuracy and precision

Infrared detection for the determination of oxygen, thermoconductivity detection for the determination

of nitrogen

山東美國分析儀廠家直銷高級診斷程序包括全數字化的在線操作手冊、維護模擬演示、圖片說明等提供快速指導。

Sample Preparation

Typically, titanium and zirconium samples are chemically etched to remove surface contamination when oxygen and nitrogen are determined. However, etching can introduce hydrogen into the sample.

ASTM method E 1409 "Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by the Inert

Gas Fusion Technique", as updated in 1996, permits either etching or abrading (filing) of the test specimen.

ASTM E 1447 "Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal

Conductivity/Infrared Detection Method" permits surface preparation by abrading (if necessary to remove

contamination). Differences in sample preparation present somewhat of a dilemma regarding simultaneous

determination of O, N, and H in titanium. However, abrading samples with a file to remove surface

contamination will yield accurate O, N, and H results. The ONH836 utilizes a high-power electrode furnace to quickly and efficiently release the target gases from within the sample, which allows for a very rapid simultaneous determination of oxygen, nitrogen, and hydrogen.

736 Series: Oxygen/Nitrogen by Inert Gas Fusion

The 736 family of Elemental Analyzers is designed for routine measurement of oxygen and nitrogen content of

inorganic materials, ferrous and nonferrous alloys, andrefractory materials using the inert gas fusion technique.

These instruments feature our Cornerstone brand ® software, a custom interface designed specifically for

touch-screen operation. Developed by combining longterm research with customer feedback, this easy-to-use

software gives you complete access to instrument control, analysis settings, diagnostics, reporting, and more—without sacrificing valuable bench space.

可選六軸可旋轉觸摸屏幕，增強了操作的工效和直觀性。

Procedure – Powder/Chip Samples

Instrument calibration/drift correction.

Calibrate/drift following the procedure outlined in the operator's instruction manual.

Login Sample with the appropriate number of reps.

Weigh approximately *** grams of appropriately prepared sample into a *** Nickel Capsule, enter mass and sample identification into appropriate rep fields. If applicable, place the nickel capsule in the

appropriate autoloader position.

Repeat steps 3c through 3i for sample analysis.

***電極爐頭設計，提高脈沖爐熱交換效率。北京美國LECO分析儀優惠價格

隨著現在科學技術的發展，儀器儀表行業發生了突飛猛進的發展，再加上當前計算機技術、網絡技術的進步和發展，組建網絡而構成實用的監控系統，可以提高生產效率和共享信息資源方向發展。當前儀器儀表行業產品發展呈現微型化、多功能化、智能化、網絡化四大發展趨勢。我國現有有限責任公司（自然）企業數千多家，已經形成門類品種比較齊全，具有一定技術基礎和生產規模的產業體系。但同時業內行家也指出，雖然我國測試儀器產業有了一定的發展，但遠遠不能滿足國民經濟各行各業日益增長的迫切需求。隨著手機移動網絡的消費潛力不斷隱現，消費者利用手機消費的頻率和份額逐年遞增。移動互聯網所隱藏的商業價值被更多地挖掘出來之后，各種傳統行業（包括光譜儀，色譜儀，質譜儀，樣品前處理行業）的移動網上平臺相繼誕生。中國服務型正面臨百年未有之大變局，行業行家認為，中美貿易戰不會有終點，中美關系時好時壞將成為常態，儀器儀表行業無法排除大局勢的影響，且不要把問題聚焦在關稅上。中國經濟的高速發展得益于WTO框架下的全球化分工;現在中國制造的競爭力在于工業門類齊全、供應鏈完整、供應鏈的高度專業和細分。北京美國LECO分析儀優惠價格