美國分析儀廠家直銷

ONH836系列：氧氮?dú)浞治鰞x（熔融法）

軟件特點和優勢

Cornerstone氧氮?dú)浞治鲕浖殖?個主要部分：分析、診斷、設定、儀器，界面可以快速導航和組織。工具條、滑動條和下拉式菜單簡化了校正和數據處理的參數設定。分析軟件同時包括實時的環境參數的監測，提供完整的系統圖表模擬。高級診斷程序包括全數字化的在線操作手冊、維護模擬演示、圖片說明等提供快速指導。Cornerstone氧氮?dú)浞治鲕浖瑫r(shí)支持***的數據文檔格式和可變的報告格式。 采用三個**的紅外器檢測氧含量，同時檢測CO和CO2，然后在轉化為CO2集中檢測。美國分析儀廠家直銷

Procedure - Solid Samples

Determine the instrument blank.

Repeat steps 2b through 2g a minimum of three times.

Set the blank following the procedure outlined in the operator's instruction manual.

Instrument calibration/drift correction.

Login a minimum of 3 Standard replicates.

Weigh approximately *** grams of a calibration/drift standard, enter the mass and standard identification into appropriate replicate fields.

Note: LECO Reference Materia***o not require preparation.See preparation statement on the reference material certificate.

LECO分析儀優惠價格雙直流風扇保證持續冷卻，不受電壓波動的影響。

Procedure - Solid Samples

Prepare the instrument as outlined in the operator's instruction manual.

Determine the instrument blank.

Login a minimum of 3 Blank replicates.

Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open. Place a 502-344 Nickel Basket into the loading head.

Note: samples using automation should be placed in the appropriate autoloader position before starting the

analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.

Sample Preparation

Sampling and sample preparation of refractory metals such as titanium and zirconium is somewhat different from that of steel. Unlike steel samples, hydrogen is not as mobile in this group of materials; therefore, storage in liquid nitrogen or dry ice is not required. However, it is important to keep the sample cool when cutting or sectioning. Sample preparation for oxygen and nitrogen determination has beendifferent from that of hydrogen determination.

工具條、滑動條和下拉式菜單簡化了校正和數據處理的參數設定。

氧氮?dú)浞治鰞x的原理：分析樣品在惰性氣流存在下于石墨坩堝中加熱熔融，其中脈沖爐溫度可自由設定，并通過一個非接觸式的光學溫度傳感器進行實時監控，用于實現樣品的完全分解，反應所生成的CO H2和N2被帶入到具有高穩定性和靈敏度的檢測系統進行檢測。對于CO的檢測采用的是非色散性紅外檢測器，對于N2和H2的檢測則采用熱導檢測器。

氧氮?dú)浞治鰞x的特點：快速準確分析，自動化操作；精密氣體校準；CO紅外檢測器，高分辨率和重現性的N、H熱導池檢測器；同一臺儀器實現熔融提取和熱提?。粺崽崛》治鰰r(shí)間可調；可自由選擇溫度*高達2500 °C；光學溫度計溫度測定和控制；所有檢測器自動調零/自動水平控制（ALC）；數據評估的自動優化選擇范圍；爐自動清潔和坩堝自動進樣（可選）；外設電腦進行操作和控制；樣品信息保存； 所有樣品數據可追蹤查詢；通過FTP或本地局域網進行數據傳輸； ON，H分析輕松切換。

強力內循環水冷裝置。安徽元素分析儀供應商

提供各種無機材料、鋼鐵、有色金屬、硬質合金陶瓷材料中寬范圍的氧氮?dú)渫瑫r(shí)測定。美國分析儀廠家直銷

氧氮?dú)浞治鰞x的常見故障及解決方法

供電正常、通訊正常，點擊確認鍵后分析儀不工作。這是沒有水流，爐子溫度太高或儀器通道電壓不正常。如沒有水流，爐子溫度太高這些信息會顯示在顯示器畫面上，但沒有信息顯示說明這兩項正常。接下來檢查儀器通道零位電壓，如果比±3V高出1V以上，可能是因?yàn)闅馄靠樟耍蛘呤强諝膺M(jìn)入到分析儀中。檢查并更換化學試劑，如果有空氣進入熱導池里，熱導池的電壓就會＜-6V，此時打開右面的門，堵住爐子氣體進口，10s后，熱導池電壓值必然升高。經過逐一排查，**終確認堿石棉有問題，更換后儀器正常。 美國分析儀廠家直銷